Get Started.

Unpack your shipping boxes.

The CR1000X ships with:

  • USB Cable
  • Screwdriver
  • Type T Thermocouple
  • Screws and Grommets for mounting (4 each)

Install your software.

The CR1000X is compatible with LoggerNet, PC400, and PC200W (versions 4.5 or higher).



View CR1000X Page

CR1000X Support Resources

  1. New CR1000X Datalogger (2:26)
  2. Datalogger Programming
  3. IP Networking and Data Loggers Part 1 (8:34)
  4. Fundamentals of CRBasic Programming Part 4: Programming for Control with Operators and Logical Expressions. (9:05)
  5. IP Networking and Data Loggers Part 2 (9:51)
  6. Fundamentals of CRBasic Programming Part 5: Conditional Tables (10:51)
  7. CR1000X Getting Started
  8. Ethernet over USB (2:11)
  9. Campbell Scientific Data Logger Expansion (8:53)
  10. CR1000X Datalogger Getting Started | Overview (Part 1) (1:52)
  11. Using a Multiplexer (8:27)
  12. CR1000X Datalogger Getting Started | Communicate (Part 2) (5:24)
  13. CR1000X Datalogger Getting Started | Program (Part 3) (5:49)
  14. CRBasic in the Real World Part 4: Offsets (7:24)
  15. CR1000X Datalogger Getting Started | Data (Part 4) (3:47)
  16. CRBasic in the Real World Part 2: Triggering Real-Time Measurements During a Site Visit (10:41)
  17. Pipeline and Sequential Modes (10:04)
  18. Double-Precision Calculations (5:50)
  19. Fundamentals of CRBasic Programming Part 6: Loops (9:02)
  20. Troubleshooting Resistance-Based Sensors (18:23)
  21. Fundamentals of CRBasic Programming Part 8: Deploy, Monitor, and Swap MicroSD Cards in the Field (7:41)
  22. CRBasic in the Real World Part 3: Subroutines (6:31)
  23. Fundamentals of CRBasic Programming Part 7:Determine If External Memory is Required/Intro to MicroSD (9:19)
  24. CRBasic in the Real World Part 1: Adding a Water Level Measurement (8:28)
  25. Fundamentals of CRBasic Programming Part 9: Retrieving Data from a MicroSD Card (5:51)
  26. Troubleshooting Voltage Output Sensors (7:42)
  27. Fundamentals of CRBasic Programming Part 1: Variables (13:30)
  28. Fundamentals of CRBasic Programming Part 2: Tables (8:53)
  29. Fundamentals of CRBasic Programming Part 3: Writing a Complete Program (14:51)
  30. CRBasic in the Real World Part 5: Changing the Sensor Used in a Program and Program Versioning (5:42)
  31. Understanding the Importance of Grounding (5:41)
  32. Replacing the CR1000X Lithium Battery (5:58)
  33. Using RTMC (2023) (10:41)
  34. Using RTMC Pro (5:44)
  35. Using RTMC Pro to Create a Report and Hotspot (6:45)
  36. Basic Troubleshooting 1: Measuring Data Logger Output Voltage With a Multimeter (3:54)
  37. Basic Troubleshooting 2: Checking Continuity (2:15)
  38. Basic Troubleshooting 3: Measuring Current Drain (4:12)
  39. Introduction to the CR1000KD (2:44)
  40. Troubleshooting with the CR1000KD (7:12)
  41. CRBasic Functions (6:23)
  42. Backing Up and Restoring Data Logger Settings Files Using Device Configuration (4:07)
  43. Creating Custom Menus in CRBasic for a Data Logger Display (8:28)
  44. Creating a Short Cut Wiring Diagram for Sensor Not in Short Cut (5:50)
  45. Wiring Diagrams for Data Logger Programs Part 1: Using Short Cut for Windows (5:28)
  46. Analyzing a CRBasic Program to Deduce Sensor Wiring (7:13)
  47. Documenting Data Logger Wiring Using an Excel Template (5:41)