Let’s go!



View CR1000X Page

CR1000X Support Resources

  1. New CR1000X Datalogger (2:26)
  2. Datalogger Programming
  3. IP Networking and Data Loggers Part 1 (8:34)
  4. Fundamentals of CRBasic Programming Part 4: Programming for Control with Operators and Logical Expressions. (9:05)
  5. IP Networking and Data Loggers Part 2 (9:51)
  6. Fundamentals of CRBasic Programming Part 5: Conditional Tables (10:51)
  7. CR1000X Getting Started
  8. Ethernet over USB (2:11)
  9. Campbell Scientific Data Logger Expansion (8:53)
  10. CR1000X Datalogger Getting Started | Overview (Part 1) (1:52)
  11. Using a Multiplexer (8:27)
  12. CR1000X Datalogger Getting Started | Communicate (Part 2) (5:24)
  13. CR1000X Datalogger Getting Started | Program (Part 3) (5:49)
  14. CRBasic in the Real World Part 4: Offsets (7:24)
  15. CR1000X Datalogger Getting Started | Data (Part 4) (3:47)
  16. CRBasic in the Real World Part 2: Triggering Real-Time Measurements During a Site Visit (10:41)
  17. Pipeline and Sequential Modes (10:04)
  18. Double-Precision Calculations (5:50)
  19. Fundamentals of CRBasic Programming Part 6: Loops (9:02)
  20. Troubleshooting Resistance-Based Sensors (18:23)
  21. Fundamentals of CRBasic Programming Part 8: Deploy, Monitor, and Swap MicroSD Cards in the Field (7:41)
  22. CRBasic in the Real World Part 3: Subroutines (6:31)
  23. Fundamentals of CRBasic Programming Part 7:Determine If External Memory is Required/Intro to MicroSD (9:19)
  24. CRBasic in the Real World Part 1: Adding a Water Level Measurement (8:28)
  25. Fundamentals of CRBasic Programming Part 9: Retrieving Data from a MicroSD Card (5:51)
  26. Troubleshooting Voltage Output Sensors (7:42)
  27. Fundamentals of CRBasic Programming Part 1: Variables (13:30)
  28. Fundamentals of CRBasic Programming Part 2: Tables (8:53)
  29. Fundamentals of CRBasic Programming Part 3: Writing a Complete Program (14:51)
  30. CRBasic in the Real World Part 5: Changing the Sensor Used in a Program and Program Versioning (5:42)
  31. Understanding the Importance of Grounding (5:41)
  32. Replacing the CR1000X Lithium Battery (5:58)
  33. Using RTMC (2023) (10:41)
  34. Using RTMC Pro (5:44)
  35. Using RTMC Pro to Create a Report and Hotspot (6:45)
  36. Basic Troubleshooting 1: Measuring Data Logger Output Voltage With a Multimeter (3:54)
  37. Basic Troubleshooting 2: Checking Continuity (2:15)
  38. Basic Troubleshooting 3: Measuring Current Drain (4:12)
  39. Introduction to the CR1000KD (2:44)
  40. Troubleshooting with the CR1000KD (7:12)
  41. CRBasic Functions (6:23)
  42. Backing Up and Restoring Data Logger Settings Files Using Device Configuration (4:07)
  43. Creating Custom Menus in CRBasic for a Data Logger Display (8:28)
  44. Creating a Short Cut Wiring Diagram for Sensor Not in Short Cut (5:50)
  45. Wiring Diagrams for Data Logger Programs Part 1: Using Short Cut for Windows (5:28)
  46. Analyzing a CRBasic Program to Deduce Sensor Wiring (7:13)
  47. Documenting Data Logger Wiring Using an Excel Template (5:41)