Current Version: 4.5
PC400 is Campbell Scientific's mid-level data logger support software. This versatile software supports a variety of telecommunication options, manual data collection, and data display. PC400 includes an easy-to-use program generator (Short Cut) as well as full-featured program editors (CRBasic, Edlog).
PC400 does not support combined communication options (e.g., phone-to-RF), PakBus routing, or scheduled data collection; LoggerNet software is recommended for applications that require those capabilities.Read More
To facilitate station setup, PC400 provides the EZSetup Wizard. This simple, station-oriented wizard walks the user through the setup process. The wizard can also be used to modify settings for an existing site.
These tools allow customers to set/edit the station’s settings, set the datalogger’s clock, view real-time data, set flags/ports, and collect data on demand. Communication links supported include direct connect, phone modems, Ethernet, narrow-band UHF and VHF radios, spread spectrum radios, or multidrop modems.
PC400 offers two full-featured programming tools—the CRBasic Editor and Edlog. The CRBasic Editor (similar in syntax to the BASIC programming language) supports our newer dataloggers. Edlog supports our retired dataloggers and the CR7.
For those who prefer a simpler means of programming their dataloggers, PC400 includes Short Cut for Windows (SCWin). SCWin can generate a program for any of our dataloggers and supports all of our popular sensors, as well as user-created custom sensor files (using an existing sensor file as the starting point). Short Cut can also be used for the ET107, ET106, and MetData1 Weather Stations.
View provides tabular data displays and line-graphs of an unlimited number of elements from a data file. The graphs can be saved in a variety of formats. The left and right y-axes of the graphs can be configured independently.
DevConfig allows you to send new operating systems to dataloggers and other devices with flash memory, configure various PakBus® settings in dataloggers, and edit settings for communication peripherals such as the NL240 and RF401A.
CardConvert is used to convert and save binary data from a PC Card, CompactFlash® card, or microSD card. PC Cards are compatible with our CR5000 and CR9000X dataloggers. CompactFlash cards are compatible with our CR1000, CR3000, CR5000, and CR9000X dataloggers. MicroSD cards are compatible with our CR6 datalogger.
Split is used to post-process data files and create reports. It sorts and combines data based on time or conditions, performs calculations on data values, converts “Day of Year” calendar dates into more traditional date/time stamps and allows variable column widths for printable reports.
|Operating System||Windows 10, 8, or 7|
|Requirement||TCP/IP services must be installed and enabled on the PC.|
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
|21X (retired)||The 21X requires three PROMs; two PROM 21X Microloggers are not compatible.|
TCP/IP services must be running on the computer.
Required computer operating system—Windows 7, 8, or 10
PC400 is compatible with the mixed array, PakBus, and TD data logger operating systems for the CR510, CR10X, and CR23X dataloggers.
Upgrade PC400 version 4.0 and newer to 4.5; no intermediate steps are required.
PC400 must be installed on your computer.
Supported Operating Systems: (32 and 64 bit) Windows 10, 8.1, 8 or 7.
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 10, 8.1, 8, and 7 (Both 32 and 64 bit)
Number of FAQs related to PC400: 21
Expand AllCollapse All
The Labels for Input Locations are defined in the datalogger program. To have these labels displayed in the Monitor Data tab, the program must be associated with the datalogger.
When using PC400 to connect to a datalogger on an RS-232 port, the baud rate must be matched. This is done through the PC400 datalogger settings.
No. However, real-time data can be displayed in tabular form in the Monitor Data tab.
PC400 can be used instead of PC208W to communicate with dataloggers, but the network setup must be done manually. There is not a way to automatically migrate an existing PC208W network to PC400. Some options available in PC208W, such as automatic scheduled data collection and multiple communications hops, are not available in PC400. A better migration path for similar PC208W features and functionality is an upgrade to LoggerNet.
PC400 is designed to run natively only under the Windows OS. However, there are third-party applications available for the Mac OS that can create a virtual environment in which some Windows applications can run. Note that Campbell Scientific does not provide testing or support for these applications.
For comparative descriptions, see the “Software Overview” brochure.
LoggerNet and PC400 have a program named Split that enables selection of records and mathematical calculations on data values in a data file. The program is especially useful in isolating data records of interest from data files from array-based dataloggers where several different types of records may be stored in the same file.
Note that the version of Split in PC200W is a different application. Its only function is to separate each array in a mixed-array file into separate files.