CM225 Solar Sensor Mounting Stand

Overview

The stainless-steel CM225 attaches one pyranometer or quantum sensor to a mast, crossarm, or pole (1 to 2 in. OD). Many pyranometers and quantum sensors also require a leveling base that secures the sensor to the CM225 as well as level the sensor.

The CM225 consists of a rectangular plate, mounting bracket, U-bolts, lock washers, and nuts.

Images

3D/CAD Files:

Specifications

Why/When to Use Used when the pyranometer only needs to be mounted in a horizontal position. It is also typically used with a crossarm.
Material 12 gage, 304 stainless steel
Dimensions 8.9 x 11.3 x 6.4 cm (3.5 x 4.5 x 2.5 in.)
Weight 0.34 kg (0.75 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
CMP11-L (retired) Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit.
CS300-L (retired) Requires the 18356 Leveling Base.

Mounting Equipment

Product Compatible Note
CM106B-CSA
CM110
CM204
UT10

Miscellaneous

Product Compatible Note
CM10 (retired)
CM106 (retired)
CM115
CM120
CM202
CM203
CM206
CM6 (retired)
CMP21-L Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit.
CMP3 (retired)
CMP6-L Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit.
LI190SB-L (retired) Requires the LI2003S Leveling Base.
LI200R-L (retired) Requires the LI2003S Leveling Base.
LI200S-L (retired) Requires the LI2003S Leveling Base.
LI200X-L (retired) Requires the LI2003S Leveling Base.
SP-LITE-L (retired)
UT20
UT30

Additional Compatibility Information

Mast or Vertical Pole

The U-bolt and V-block use the bracket's side holes to attach to a tripod or tower mast or to a user-supplied vertical pole.

User-Supplied Vertical Pole

The CM225 can mount to a 0.75 to 1.5 in. pipe size (1 to 2 in. OD).