WXT536 Weather Sensor

Overview

The WXT536 is a solid-state, all-in-one weather instrument that measures wind speed and direction, precipitation, barometric pressure, temperature and relative humidity. Its small size makes it ideal for quick, short-term deployments. However, the WXT536 is not intended for weather stations that require research-grade performance.

Read More

Benefits and Features

  • Low power consumption is ideal for battery powered systems
  • No moving parts for durability and long maintenance intervals
  • Easy integration with 3rd party data collection platforms

Images

Technical Description

The WXT536's wind sensor consists of three equally spaced transducers that produce ultrasonic signals. Wind speed and direction are determined by measuring the time it takes for the ultrasonic signal of one transducer to travel to the other transducers.

Precipitation is measured one raindrop at a time. Whenever a raindrop hits the precipitation sensor, an electrical signal is produced that is proportional to the volume of the drop.

The WXT536 has a PTU module that contains a capacitive silicon BAROCAP sensor for barometric pressure measurements, a capacitive ceramic THERMOCAP sensor for air temperature measurements, and a capacitive thin film polymer HUMICAP180 sensor for relative humidity measurements. The PTU is housed in a naturally-aspirated radiation shield that protects it and reflects solar radiation.

Specifications

Measurement Range 0 to 100% RH
Accuracy "±3% RH @ 0 to 90% RH
±5% RH @ 90 to 100% RH"
Output Resolution 0.1% RH
Precipitation
Rainfall Measurement Cumulative accumulation after latest automatic or manual reset
Collecting Area 60 cm<sup>2</sup>
Output Resolution 0.01 mm 0.001 in
Field Accuracy for Daily Accumulation Better than 5% Weather dependent; does not include possible wind induced error
Rain Duration Counting each 10-s increment whenever droplet detected
Rain Intensity 1 minute running average in 10 second steps
Rain Intensity Range 0 to 200 mm hr<sup>-1</sup> Broader range possible with reduced accuracy
Wind Speed
Measurement Range 0 to 60 m s<sup>-1</sup>
Response Time 0.25 s
Available Variables Average, maximum and minimum
Accuracy ±3% at 10 m.s<sup>-1</sup>
Wind Direction
Measurement Range 0° to 360°
Response Time 0.25 s
Available Variables Average, maximum and minimum
Accuracy ±3° at 10 m.s<sup>-1 </sup>
Output Resolution 1°

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR200X (retired)
CR500 (retired)
CR5000 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Mounting

The WXT536 is shipped with a mounting tube. The mounting tube fastens to a CM202, CM204, or CM206 crossarm via the CM220 Right Angle Mounting Bracket or 17953 1-in x 1-in NU-RAIL Fitting.

The 212792 is an optional mounting kit for the WXT536. It provides better water protection. When using the 212792, the WXT536’s IP classification is IP66; otherwise its classification is IP65. The 212792 fastens to a crossarm via the CM220 bracket or 17953 NU-RAIL fitting.


Bird Spike Kit

The 212793 Bird Spike Kit is used to discourage birds from roosting on the WXT536. This kit is fastened on top of the WXT536. It consists of a metallic band with spikes pointing upward. The spike’s shape and location ensure minimal interference of wind and rain measurements. The spikes are designed not to hurt the birds. Please note that when the kit is attached to the WXT536, more snow can accumulate on the WXT536, and the snow may melt slower.

Related Documents