Subscribe

Subscribe to receive email notifications when new videos are posted.

Displaying 1 to 10 of 14
Sort by
 

Campbell Scientific Hydro-Link Part 6: Diagnostics

Welcome to a six-part series on using the Campbell Scientific Hydro-Link™ software. This series covers the installation, set-up, and use...

(3:05) Uploaded: 11/2/2018


Campbell Scientific Hydro-Link Part 5: Data Retrieval

Welcome to a six-part series on using the Campbell Scientific Hydro-Link™ software. This series covers the installation, set-up, and use...

(4:04) Uploaded: 11/2/2018


Campbell Scientific Hydro-Link Part 4: Using the Dashboard

Welcome to a six-part series on using the Campbell Scientific Hydro-Link™ software. This series covers the installation, set-up, and use...

(8:04) Uploaded: 11/2/2018


Campbell Scientific Hydro-Link Part 3: Communications

Welcome to a six-part series on using the Campbell Scientific Hydro-Link™ software. This series covers the installation, set-up, and use...

(6:58) Uploaded: 11/2/2018


Campbell Scientific Hydro-Link Part 2: Sensors

Welcome to a six-part series on using the Campbell Scientific Hydro-Link™ software. This series covers the installation, set-up, and use...

(9:22) Uploaded: 11/2/2018


Campbell Scientific Hydro-Link Part 1: Overview

Welcome to a six-part series on using the Campbell Scientific Hydro-Link™ software. This series covers the installation, set-up, and use...

(2:47) Uploaded: 11/2/2018


Installing the Split Mesh Cable Grip

See how quick and easy it is to install a split mesh cable grip.

(1:31) Uploaded: 10/28/2016


Configuring a Campbell Scientific Water Sampler

Watch a demonstration of how to set the following: a start delay, time/day initiation, 15-minute interval time, and composite sample.

(7:28) Uploaded: 10/25/2016


PVS5120-Series Samplers | Manual Control Functions

A quick review of how to service a PVS5120-series sampler, manually collect a sample, and run an auto-deploy routine.

(3:13) Uploaded: 7/15/2015


PVS5120-Series Samplers | CR1000 Connection (Part 3)

Part 3 of a three-part series demonstrating how to set up a CR1000 datalogger to communicate with and control a...

(3:33) Uploaded: 2/13/2015