 
                
			
			
				The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
In the image, the RAD06 is mounted to a crossarm with a thermistor.
Read More 
				 
							 
							 
							The RAD06 houses one 107, 108, 109, CS215, or HMP60 probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland.
The RAD06 includes a 2 in. U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
| Product | Compatible | Note | 
|---|---|---|
| 107-L | ||
| 108-L | ||
| 43347-L | ||
| CS500-L (retired) | ||
| HMP155A-L | ||
| HMP45C-L (retired) | ||
| HMP50-L (retired) | ||
| HMP60-L | 
The RAD06 attaches to a crossarm, mast, or user-supplied pipe with a 1.0 to 2.1 in. OD.
| Construction | UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp | 
| Plate Diameter | 12.3 cm (4.84 in.) | 
| Height | 14.2 cm (5.59 in.) | 
| Weight | 870 g (1.92 lb) |