What We Do

Campbell Scientific systems are used in the oil and gas industry to monitor and control pumping facilities, and monitor slope stability, water resources, weather, air quality, and equipment performance. Our rugged, low-power instruments are used worldwide, even in harsh, remote locations. Campbell dataloggers can use various types of input, and can output data and alarms via most communication methods.

Systems

Sensors

HS2P

Interchangeable sensors; can swap the 12 cm and 20 cm sensors with the reader.

CS650-L

Not interchangeable Soil electrical conductivity (EC), relative dielectric permittivity, volumetric water content, soil temperature

HS2P

Volumetric water content of porous media (such as soil)
  • Probe Options: 3% typical (Accuracy assumes solution EC of < 6.5 dS/m when using the CS659P 12-cm probe.)
  • Probe Options: 3% typical (Accuracy assumes solution EC of < 4 dS/m when using the CS658P 20-cm probe.)

CS650-L

  • Volumetric Water Content: ±3% (typical with factory VWC model) where solution EC < 3 dS/m
  • Volumetric Water Content: ±1% (with soil-specific calibration)

HS2P

HS2P is a complete system.

CS650-L

Measurement system Long rods with large sensing volume (> 6 L) are suitable for soils with low to moderate electrical conductivity.

HS2P

Short rods are easy to install in hard soil. Suitable for soils with higher electrical conductivity.

CS650-L

Not replaceable

HS2P

Replaceable

CS655-L

Not interchangeable Soil electrical conductivity (EC), relative dielectric permittivity, volumetric water content, soil temperature
  • Volumetric Water Content: ±3% (typical with factory VWC model) where solution EC < 10 dS/m
  • Volumetric Water Content: ±1% (with soil-specific calibration) where solution EC < 3 dS/m
Measurement system Short rods are easy to install in hard soil. Suitable for soils with higher electrical conductivity. Not replaceable

CWS655A

CS616-L

Not interchangeable Volumetric water content of porous media (such as soil) ±2.5% VWC (using standard calibration with bulk EC of ≤ 0.5 dS m-1, bulk density of ≤ 1.55 g cm-3, and measurement range of 0% to 50% VWC) Measurement system Long rods and lower frequency are well-suited for soft soil with low electrical conductivity (< 2 dS/m). Not replaceable

HS2

Interchangeable sensors; can swap the 12 cm and 20 cm sensors with the reader. Volumetric water content of porous media (such as soil)
  • Probe Options: 3% typical (Accuracy assumes solution EC of < 6.5 dS/m when using the CS659 12-cm probe.)
  • Probe Options: 3% typical (Accuracy assumes solution EC of < 4 dS/m when using the CS658 20-cm probe.)
HS2 is a complete system. Short rods are easy to install in hard soil. Suitable for soils with higher electrical conductivity. Replaceable

CS658

Not interchangeable Volumetric water content of porous media (such as soil) HS2 Suitable for hard soils. Replaceable

CS659

Not interchangeable Volumetric water content of porous media (such as soil) HS2 Suitable for hard soils. Replaceable

DOT600

TDR100

Customize a System

Most of the systems we sell are customized. Tell us what you need and we'll help you configure a system that meets your exact needs.


Related Integrators

The following is a list of companies that have developed expertise in our products and provide consulting, installation, and other services for oil and gas applications.