FAQs Frequently asked questions about our products and solutions

Is it possible to watch real-time online images using the CC640 and a suitable datalogger? How it is possible to retrieve data from the camera, as there is only one RS-232 port on the datalogger, which is usually used for a GPRS device?

Real-time images cannot be viewed. This is a snapshot camera. Regarding the serial port being used, if the datalogger is a PakBus CR510 or CR10X, then the interface is not RS-232; the interface is CS I/O, which is a 5 V system. This interface is also addressable, meaning that more than one device can use the port at the same time. If a CR1000 or CR3000 is used, both 9-pin connectors and all four COM ports can be used to acquire images.

Similar FAQs

• What do “serial port open failed” and “permission denied” error messages mean?
• Can PC400 be downloaded directly from the Campbell Scientific website?
• What is needed to upgrade PC208 software to PC400 software?
• Can RTMC Pro send email messages or execute programs when alarms occur?
• Is a separate extension cable for a 05106-L available? The current cable is approximately 13 ft long, and it would be helpful to extend the cable another 20 ft.
• Where is the Transformer tool?
• When the GPSReady variable is not 10, does the datalogger still synchronize with the PPS signal?