FAQs Frequently asked questions about our products and solutions

Ask a Question Ask a Question

All FAQs (1927 total: showing 1021-1040)

What are the suggested supply voltages for both the vane and anemometer of a 034B-L?
What is the power consumption of the 034B-L anemometer?
Do the vane and anemometer of the 034B-L produce analog or digital signals?
What type of pole and mounting bracket should be used to mount a 034B-L against an outside wall of a building, sticking up over the roofline?
Can the 034B-L store data?
What needs to be done to replace an existing 034A-L at a weather station with a new 034B-L?
What is the major difference between the 034B-L and the 03002-L?
If the connection can no longer be made to a datalogger that is connected to a Raven XT-series modem via an RS-232 port, what might be the reason?
Using the RavenXTG or RavenXTV as an Internet device, is it possible to have the datalogger email the data file to multiple email addresses daily?
How can the RavenXTG or RavenXTV be coded to only work for a couple hours when the data is to be sent to the server?
Can a RavenXTG be used in an application outside of the U.S.?
What configuration settings need to be made to a RavenXTG to make an AT&T network mobile-to-mobile connection?
How long does it take to deploy/install the CM120 or CM115 mast, and how many people are needed to do it?
Is it possible to use the CR1000KD to connect to remote RF stations using an RF modem and a radio?
If an RF modem is no longer working, can it be repaired?
Is it possible to network two dataloggers to download data from both over a single cellular phone using a Raven XT-series modem?
Do the RavenXTV and the RavenXTG run on 12 Vdc?
Do the RavenXTV and the RavenXTG have an RS-232 DB9 connector?
Do the RavenXTV and the RavenXTG require a dipole cellular antenna?
What needs to be done to have a data table sent to an FTP server using a RavenXTV or a RavenXTG?

Previous Next