DIN Rail Products Make your wiring inside your enclosure cleaner

Other Enclosure Accessories / DIN Rail Products

About DIN Rail Products

DIN-rail mountable products include terminals, fuse holders, surge protection, and circuit breakers that can be mounted to a standard DIN-rail bracket. Campbell Scientific recommends using these products with our 25458 and 28532 DIN-rail mounting kits.

Retired Products
Documents

Product Line

39086 6 in. DIN Rail Mounting Kit

The 39086 can facilitate wiring when many wires need to be connected to one terminal. This kit contains one DIN rail mounting bracket, two 505 screws, two 6044 grommets, and two 15908 DIN Rail Stopper...read more

39207 DIN Rail Mounting Kit for BaroVue 10

The 39207 mounting kit enables mounting of the BaroVue™10 Digital Barometer in an industrial enclosure using an industry-standard 35 mm (1.38 in.) DIN rail. read more

35690 GRANITE Series DIN Rail Kit for 2 in. Modules

The 35690 can be purchased as an accessory to mount the 5.08 cm (2 in.) GRANITE™ modules on a DIN Rail instead of the standard backplate mounting. read more

35691 GRANITE Series DIN Rail Kit for 3 in. Modules

The 35691 can be purchased as an accessory to mount the 7.62 cm (3 in.) GRANITE™ modules on a DIN-Rail instead of the standard backplate mounting.read more

DIN Rail Terminal Kits

DIN rail terminal kits provide the needed DIN rail terminals, separator, and wires to connect the terminals of a sensor to a data logger or other peripheral. The color-coding of these wires matches th...read more

Other Considerations

15920 DIN Rail Mountable 3-Wire 4 mm Spring-Loaded Connector

The 15920 is a DIN rail mountable terminal connector that can be used between sensors (or other devices) and a data logger. The 15920 is a three-wire, 4-mm spring-loaded connector. An 8125 flat-bladed...read more