GSM and 3G / DCP-SAM3GPLUS-CS I/O(X)
Overview
Campbell Scientific Australia is proud to present a 2G/3G modem kit created and tested for Australian telecommunications providers and conditions.
This kit incorporates:
- The Intercel SAM3G+ modem with custom firmware to ensure proper interaction with Campbell Scientific data loggers.
- A cable for connection to a data logger's CS I/O port, such as can be found on our CR200X, CR800, CR1000 and CR3000 data loggers.
- An interface SC932A and a SC12 cable
Note: Antenna and Surge protection are not included.
Images
Specifications
- Operating Temperature: -20°C to +60°C
- Supply Voltage: 5 to 32 VDC
- Power Consumption (12V): Average 250mA using 3G
- Average 205mA using 2G
- 30mA in standby
- Antenna: SMB Male 50Ω SMB Male – FME Female connector supplied.
- Other Interfaces: RS232 and Power via RJ45 Connector, USB for PC Interface
- Dimensions: 74mm x 45mm x 24mm
- Weight: 56g (without antennas)
- Frequency Bands: UMTS/HSPA (3G) 850MHz, 1900MHz, 2100MHz
GPRS/EDGE (2G) 850MHz, 900MHz, 1800MHz, 1900MHz
Compatibility
Compatible Contemporary Dataloggers
| CR200(X) Series | CR800/CR850 | CR1000 | CR3000 | CR5000 | CR7X | CR9000X |
 |
|
|