The CABLEPCBL-L is a 16 AWG, two-conductor cable with a Santoprene jacket. The conductors are stripped and tinned. This generic cable is used to power remote peripherals.read more
The 27423 Scrub Module for the CPEC200 is an accessory to the CPEC200 Closed-Path Eddy-Covariance System. It is used to provide a source of zero air (air that contains no CO2 or H2O) to the CPEC2...read more
The CABLE4CBL-L is a 22-AWG, four-conductor cable with a Santoprene jacket and an aluminum Mylar shield. The conductors are stripped and tinned and have red, black, green, and white insulation colors....read more
The CABLE2TP-L is a two-twisted pair, 22 AWG cable that has a Santoprene jacket. Insulation colors of the twisted pairs are red/black and green/white. An aluminum Mylar shield is grounded via a drain...read more
The CABLE3TP is a three-twisted pair, 24 AWG cable that has a Santoprene jacket. Insulation colors of the twisted pairs are red/black, green/white, and blue/yellow. An aluminum Mylar shield is grounde...read more
The 26504-L is a pre-swaged 3/8 in. OD pump tubing assembly used for connecting the EC155 CO2/H2O Closed-Path Gas Analyzer to the pump module with a recommended maximum distance of 50 ft. The 265...read more
The 26503-L is a pre-swaged ½ in. OD pump tubing assembly used for connecting the EC155 CO2/H2O Closed-Path Gas Analyzer to the pump module with a recommended distance of 50 to 500 ft...read more
The 21823-L is a common accessory for the CPEC100 Closed-Path Eddy-Covariance System. The 21823 provides a calibration gas tubing assembly. Tubing length is user specified. The tubing assembly is for...read more
The CFMC2G is a 2 GB, industrial-grade CompactFlash card that has been selected specifically to provide optimum performance and extreme reliability. It is used with the CFM100, NL115, or CF1 to expand...read more
