Easily Return the Sensor to a Freshly Calibrated State
Overview
The BVC10 is a replacement sensor card for the BaroVue™10 Digital Barometer. Campbell Scientific recommends recalibrating or replacing the sensor card when the quality metric drops below 4.00. The BVC10 can be installed at the field site, eliminating downtime and the need for multiple visits to the site.
Images
Specifications
| Dimensions | 14.61 x 10.16 x 0.25 cm (5.75 x 4.0 x 0.1 in.) |
| Weight | 22.68 g (0.05 lb) |
Related FAQs
Number of FAQs related to BVC10: 1
-
The calibration sheet supplied with your BaroVue 10 applies to the sensor card (BVC10). The serial number on the outside of the unit refers to the serial number of the BaroVue 10 main board. To confirm you have the correct calibration sheet, please open the device and check the serial number on the BVC10 sensor card itself.
Listed Under
Replacement Part for the following products: