CDM Accessories / 29796
RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available |
|---|
Overview
The POWER SUPPLY 24 is a 240VAC switched-mode transformer to provide 24V DC to a maximum of 1A.
The DC end of this transformer has bare tinned wires.
Images
Specifications
| Temperature Range | -40° to +40°C |
| Input Voltage | 100 to 240 Vac |
| Input Frequency | 47 to 63 Hz |
| Output Voltage | 24 Vdc |
| Maximum Output Current | 1.67 A |
| Standards | UL60950-1 2nd Edition |
| Cable Length | 1.52 m (5 ft) |
| Dimensions | 8.89 x 5.72 x 3.81 cm (3.5 x 2.25 x 1.5 in.) |
| Weight | 272.16 g (0.6 lb) |
Listed Under
Other Accessory for the following products:
Common Accessory for the following products:
- VWIRE305 - 8-Channel Dynamic Vibrating Wire Analyzer
- VOLT108 - 8- or 16-Channel 5V Analog Input Module
- GRANITE6 - Measurement and Control Data-Acquisition System
- GRANITE10 - Measurement and Control Data-Acquisition System
- CRVW3 - Three-Channel Vibrating Wire Datalogger
- VOLT116 - 16- or 32-Channel 5V Analog Input Module
- TEMP120 - 20-Channel Thermocouple Module
- GRANITE9 - Measurement and Control Data-Acquisition System
- 10516 - CR5000 Sealed Rechargeable Battery Base
- 10518 - CR3000 or CR23X Sealed Rechargeable Battery Base
- PS150 - 12 V Power Supply
- CRVW3-NE - 3-Channel Vibrating-Wire Datalogger without Enclosure
- 29290 - 12 V Power Supply with Charging Regulator but without a Battery
- CR310 - Data Logger with Ethernet
- CR300 - Measurement and Control Datalogger
- CH150 - 12 V Charging Regulator
- CR6 - Automated Monitoring Platform
- 22238 - PS200 12 V Power Supply with Charging Regulator but without Battery
- PS200 - Power Supply with Charging Regulator and Rechargeable Battery