Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Connect 5 PT100 sensors to a CR1000X datalogger through an AM16 / 32B Fadvis 3
CR1000X I2C Communication? Not even showing up in CRBasic Editor Waq 9
No response from modbus sensor when reading it after other modbus sensor [CR1000X] Italo_ 2
execute matlab .m with loggernet TaskMaster AMK 4
4-20mA HART communications.... Marc W. 0
skyvue report laser run time has been exceeded chengchen 0
TableFile and TDR100 gordi 2
How to measure a current loop. crack meter. looping 4-20mA as wire continues to extend Shanks.J 0
Option 64 and scheduled downloads tchill 2
CR1000X USING PortGET error ykzhao 0
Download older version of DevConfig utility supporting windows XP niksteiak 3
"file is remote/inaccessible or does not exist" redux Delta1 1
CR1000X Datalogger - Example code to use a GSM Modem with the datalogger Shreeshant 4
Datatable name as a variable? NLA_MV 2
Remote CRVW3 via IP smile 2
SMS Alert Nichol 1
Underwater Camera JonDUSACE 0
Changing Station Name MPPMC 6
Boltek EFM and CS Logger AJ Meyer 0
LNDB data not going to database brf11 2
To increase Control Port Yaj 0
Gzip error codes MortenS 2
Listing of variables or Table.Fieldnames that can be queried from a RF407? glennh 3
CR1000 with HMP155 on a SDM-SIO1A DavidCo 0
Question about management of stations maurixio 1
CRBasic Forward declaration MortenS 2
how connect NL201 to RF451 on CS I/O ports furban 3
Csi web server problem Chakir 5
Does the CR6 datalogger support HTTP digest authentication? Kael 4
Sensirion SPS30 with Campbell data logger stevieb 1