The CM255 is used for most applications that require mounting a solar sensor at adjustable angles. The CM255 includes slots that can be adjusted to any angle from horizontal to vertical. The mounting...read more
The stainless-steel CM225 attaches one pyranometer or quantum sensor to a mast, crossarm, or pole (1 to 2 in. OD). Many pyranometers and quantum sensors also require a leveling base that secures the s...read more
The 27065 (formerly the CM245) is commonly used to attach the IMT reference cell or the RSR rotating shadowband band radiometer from Irradiance Inc. to a horizontal crossarm, vertical mast, or the tor...read more
The LI2003S, manufactured by LI-COR, is required to attach an LI200X pyranometer or LI190SB quantum sensor to our CM225 solar sensor mounting stand, 015ARM mounting arm, or 025STAND crossarm sta...read more
The 18356 leveling base, manufactured by Apogee Instruments, is required to attach the CS300 or SP230 pyranometer to our CM225 solar sensor mounting stand. The 18356 levels the sensor in the horizonta...read more
The AL-100 leveling base is required to attach Apogee pyranometers to our CM225 solar sensor mounting stand. The Al-100 levels the sensor in the horizontal plane, helping to ensure accurate solar radi...read more
The AL-210 Meter leveling base is required to attach the MP-100 and MQ-100 meters to our CM225 solar sensor mounting stand. The Al-210 levels the meter in the horizontal plane, helping to ensure accur...read more
Campbell Scientific created an improved mounting kit for the net radiometers we offer. The kit, part number 26120, replaces mounting kit numbers 19455 and 14264. It performs better in dry or salty env...read more
The 21271 is used to attach an older NR01 net radiometer (serial numbers less than 2313) to a CM204 or CM206 crossarm. Campbell Scientific recommends mounting the crossarm to a CM300-series mounting p...read more
The process of securely mounting and accurately leveling a pyranometer and vent unit to a mounting bracket has traditionally been very difficult. The balance between tightly securing the sensor to the...read more
For many applications, the 015ARM Pyranometer Mounting Arm has been replaced by a CM225 Solar Sensor Mounting Stand. The 015ARM is used to attach a pyranometer or quantum sensor to a tripod. Many pyra...read more
