General Mounts / CM220
RETIRED ›
This product is no longer available and has been replaced by: CM221. Some accessories, replacement parts, or services may still be available.
CM220 Right-Angle Mounting Bracket
Services Available
Free Support Yes

Overview

The CM220 right-angle mounting bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a crossarm. It is compatible with pipes that have a 1- to 1.5-inch outer diameter. (For more information, refer to the Compatibility tab.)The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 Nu-Rail Offset Crossover fitting.

Read More

Images


3D/CAD Files:

Technical Description

The CM220 Right-Angle Mounting Bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a CM202, CM204, or CM206 crossarm. It is compatible with pipes that have a 1.0" to 1.5" outer diameter.

The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 NU-RAIL Offset Crossover fitting.

Specifications

U-bolt and Washer Material 304 stainless steel (not passivated)
Bracket Material 12 gage, 304 stainless steel (not passivated)
Dimensions 5.74 x 5.74 x 7.62 cm (2.25 x 2.25 x 3 in.)
Weight 0.29 kg (0.65 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
03002-L
034B-L (retired)
05103-L

Mounting Equipment

Product Compatible Note
CM204

Miscellaneous

Product Compatible Note
014A-L
05103-45-L (retired)
05106-L (retired)
05305-L
27106T-L
52202-L
CM202
CM203
CM206
CSAT3 (retired)
SI-111 (retired)
SR50A-L (retired)
WXT520 (retired)

Additional Compatibility Information

Sensors

The CM220 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.

Pipe

The CM220 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).

Peripherals

The CM220 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.


Listed Under